New Zealand Oil and gas
SHAREPRICE
hero-2.jpg

News

This section of our website includes all of our media releases, speeches and presentations. You can view a topic using the tag cloud, or by the date archive found on the right hand side.

News

Oi-2 spuds

Posted on 13 June 2014

Drilling is underway in the Oi-2 well in Petroleum Mining Permit 38158, the operator has advised.

Read the full post

New well drilled at Oi

Posted on 10 June 2014

A new well will be drilled in the Oi prospect in Petroleum Mining Permit 38158 after encountering difficulties setting casing.

Read the full post

Oi well spuds in Tui permit

Posted on 2 June 2014

The Kan Tan IV semi-submersible drilling rig began drilling the Oi-1 exploration well in Petroleum Mining Permit 38158, approximately 37 kilometres off the coast of Taranaki, New Zealand at 6.30PM on Friday, 30 May (NZDT).

Read the full post

Pateke-4H Weekly Update 20 May

Posted on 20 May 2014

The Pateke-4H well in PEP 38158, offshore Taranaki, has been successfully completed and suspended for production at a later date, the operator has advised.

Read the full post

Pateke-4H Weekly Update 13 May

Posted on 13 May 2014

Production tubing was being run at the Pateke-4H well, in PEP 38158 offshore Taranaki, the Operator has advised as of six o’clock this morning.

Read the full post

Pateke-4H drilling update 6 May

Posted on 6 May 2014

At 06:00 this morning (NZST) the Pateke-4H well offshore Taranaki, New Zealand, was at a total measured depth of 4,772 metres, including a 749 metre horizontal section through the reservoir.

Read the full post

Pateke-4H drilling further update 5 May

Posted on 5 May 2014

The Pateke-4H well in the Tui fields is to be completed and suspended to enable production in Q1 2015.

Read the full post

Pateke-4H drilling update 5 May

Posted on 5 May 2014

Drilling has ceased at a revised total measured depth of 4,772 metres in the Pateke-4H well offshore Taranaki, New Zealand, and a 6 5/8 inch slotted production liner is being run, the operator has advised.

Read the full post

Pateke-4H drilling update 29 April 2014

Posted on 29 April 2014

At 6.00 this morning (NZST) the Pateke-4H well, offshore Taranaki, New Zealand, was at a measured depth of 4,700 metres and drilling ahead horizontally through the Kapuni F10 sandstone reservoir with an 8 1/2 inch drilling assembly, the operator has advised.

Read the full post

Seismic survey completed at Waru

Posted on 22 April 2014

A seismic survey of around 540 kilometres of 2D data has been completed in the Waru permit, PEP 54857 off South Taranaki, where New Zealand Oil & Gas holds a 100 per cent interest.

Read the full post