Tag: Pateke IIII

Production begins at Pateke-4H well

Posted on 8 April 2015

The subsea tie-back and installation project to connect the Pateke-4H well to the Tui area oil fields in PMP 38158 has been successfully completed and oil production has commenced, the operator has advised.

Read the full post

Pateke-4H subsea tie-back underway

Posted on 6 March 2015

Pateke-4H subsea tie-back and installation project has commenced.

Read the full post

Pateke-4H reserves

Posted on 12 January 2015

New Zealand Oil & Gas and Pan Pacific Petroleum have completed a review of the increase in Tui reserves attributable to the Pateke-4H well.

Read the full post

Pateke-4H Weekly Update 20 May

Posted on 20 May 2014

The Pateke-4H well in PEP 38158, offshore Taranaki, has been successfully completed and suspended for production at a later date, the operator has advised.

Read the full post

Pateke-4H Weekly Update 13 May

Posted on 13 May 2014

Production tubing was being run at the Pateke-4H well, in PEP 38158 offshore Taranaki, the Operator has advised as of six o’clock this morning.

Read the full post

Pateke-4H drilling update 6 May

Posted on 6 May 2014

At 06:00 this morning (NZST) the Pateke-4H well offshore Taranaki, New Zealand, was at a total measured depth of 4,772 metres, including a 749 metre horizontal section through the reservoir.

Read the full post

Pateke-4H drilling further update 5 May

Posted on 5 May 2014

The Pateke-4H well in the Tui fields is to be completed and suspended to enable production in Q1 2015.

Read the full post

Pateke-4H drilling update 5 May

Posted on 5 May 2014

Drilling has ceased at a revised total measured depth of 4,772 metres in the Pateke-4H well offshore Taranaki, New Zealand, and a 6 5/8 inch slotted production liner is being run, the operator has advised.

Read the full post

Pateke-4H drilling update 29 April 2014

Posted on 29 April 2014

At 6.00 this morning (NZST) the Pateke-4H well, offshore Taranaki, New Zealand, was at a measured depth of 4,700 metres and drilling ahead horizontally through the Kapuni F10 sandstone reservoir with an 8 1/2 inch drilling assembly, the operator has advised.

Read the full post

Pateke-4H drilling update 22 April 2014

Posted on 22 April 2014

At 6.00 this morning (NZST) the Pateke-4H well, offshore Taranaki, New Zealand, was at a measured depth of 3,863 metres and drilling ahead at around 10 metres/hour with an 8 1/2 inch drilling assembly after successfully side-tracking from the 9 5/8 inch casing at 3,587 metres, the operator has advised.

Read the full post